POWDER & BULK SOLIDS 2021
 *** International Powder & Bulk Solids - iPBS2021 is over. |
|---|
|
Exhibitors |
MITSUMI Technical/ AAAmachine / AAA Save Energy booth#: 1221 (600sf, 20'*30') KAWATA USA Inc. booth#: 1221 (600sf, 20'*30') NBC Meshtec booth#: 1221 (600sf, 20'*30') ACO booth#: 1221 (600sf, 20'*30') Asada Mesh booth#: 1221 (600sf, 20'*30') Nisshin Engineering Inc. booth#: 1221 (600sf, 20'*30') Tsutsui Scientific Instruments booth#: 1221 (600sf, 20'*30') APPIE (The Association of Powder Process Industry and Engineering, Japan) booth#: 2303 (100sf, 10'*10') |
|---|
◆ AAAmachine booth information ◆
AAAmachine is assisting global powder handling equipment manufacturers from outside of USA.
|
NBC Meshtec #1221 NAFITEC / Screen mesh Nafitec treated / non treated NAFITEC screen mesh to be demonstrated at Booth# 1221 |
   |
|---|---|
| NBC Meshtec Inc. will introduce Nafitec for screen mesh. This technology can be applied to stainless steel wiremesh and standard Nylon screen. After applying Nafitec treatment, screen can minimize sieve clogging and can increase through-put up to 5.8 times (depending on the powder characteristics). Although it is surface treatment to screen, it can last quite long (at least one year for wheat flour) and there is no foreign articles found in the products for food quality purpose. |
|
|
ASADA Mesh #1221 Stainless steel wiremesh Nafitec treated / non treated 16μ opening and Oblong (25/32μ) Screen samples to be shown at Booth# 1221 |
 |
|---|---|
| ASADA Mesh. will introduce
Stainless steel wiremesh (13 and 16 microns opening and Oblong - 25/32 microns) for screen mesh. This technology can be utilized for screening spherical metal powder, such as Solder, Copper, Nickel alloy, Ferrite, Iron, etc., Oblong screen can minimize sieve clogging and can increase through-put (depending on the powder characteristics). Main use is electronic (Solder paste for micro size IC and circuit board) and 3D printing |
|
|
Tsutsui Scientific Instruments #1221 Customized instruments Sonic Sifter  |
 |
|---|---|
| Tsutsui Scientific Instruments's powder flowability test unit is certified by JIS and is widely used in various industries, such as 3-D printers and others. The company also offers
sieve shakers, sonic sifters,and bulk density measurement devices. Powder manufacturers have been continuously using Tsutsui instruments for quality control/assurance. The company can customize instruments to meet clients' needs. |
|
|
MITSUMI Technical Industry #1221 MITSUMI Iris Valve "CHOKE VALVE" & MITSUMI Diverter Valve CHOKE VALVE will be demonstrated at booth #1221 CHOKE VALVE will be demonstrated at booth #1221 |
   |
|---|---|
|
MITSUMI Iris Valve "CHOKE VALVE"- "half action" of normal iris valves (about 90-degree rotation), can close/open the valve. As a result, air cylinders can be used for automatic operation. MITSUMI Iris valve can decrease total system cost because of no use of motor valve. Cloth end does not rotate. Rope tightens the cloth chute by squeezing a hopper-type chute outside with a rope. Wall pass-through valve and non-sleeve Iris valve are now introduced. Mitsumi Diverter Valve features the following 2 points. (1) Moving cloth can make self-cleaning when activating. (2) 180 degree rotating air cylinder can realize powder flowing chute without creating valve touching face. |
|
| KAWATA USA Inc. #1221 SUPER MIXER & SUPER FLOATER Super Floater SFC-50 & Super Mixer Piccolo |
  |
|---|---|
| KAWATA Super Floater "SFC-50" is now introduced to USA. This is plastic bag using fluidizing mixer, which is perfect mixer for various color handling. No vessel cleaning is required between batches. Kawata Super Mixer is completely customizable mixing systems in various range of capacity. Specific mixing blades allow for much more advanced processes such as dispersion, pelletizing, granulation, drying, coating, surface treatment and more. |
|
| NISSHIN ENGINEERING #1221 Air classifier / Powder processing service Turbo-Classifier TC-15NS will be demonstrated at booth #1221 |
 |
|---|---|
| Nisshin Engineering Inc. is a AAA-rated powder-handling equipment manufacturer in Japan. AAAmachine Inc. is the U.S. marketing/technical agent. Main products include the Turbo-Classifier (a micron order air classifier), the AeroFine Classifier (a submicron order air classifier), the Super Jet Mill (jet mill), Super Rotor mechanical mill, and Dispa-Mue-R/PDSL (dry powder sprayers and dispersers). |
|
| Osaka Gas Liquid #1221 Custom processing service |
  |
|---|---|
| Cryogenic grinding is a technique that uses liquefied nitrogen cooled to an ultralow temperature (−196℃/-320 degree F) to freeze and grind various materials including resins and foods. By using liquefied nitrogen produced by an affiliated company in the same group, we can conduct low-cost and highly efficient grinding Osaka Gas Liquid has 2 separate facilities for food and plastics. |
|
| AAAmachine, Inc. #1221 Custom processing service |
 
|
|---|---|
|
MITSUMI Iris Valve "CHOKE VALVE"- "half action" of normal iris valves (about 90-degree rotation), can close/open the valve. As a result, air th (1) Movinalve touching face. |
|
| Fahrenheit / AAA Save Energy #1221 Adsorption Heat Pump (AdHP) Chiller Chilled water from hot water |
|
|---|---|
Fahrenheit introduced Adsorption Heat Pump (AdHP) Chiller eCoo30- 35KW (10RT, 120,000 BTU/hr) COOLing capacity (901kb), utilizing 65 - 85 degree C (149-185 degree F) hot water, This can produce chilled water directly from hot water only. Electricity is used only for control & water flow. This chiller unit uses waste heat or solar hot water and contributes to environmental sustainability through reduced CO2 emissions. Using water as the refrigerant, this next generation chiller boasts a system COP (Coefficient of Performance) of 10. (COP=10 means 30 kw Cooling capacity can be acquired from 3 kw electricity.) No Freon, no Lithium Bromide is required.10 kw (36,000BTU/hr) model is also available.
|
|
| ACO #1221 Wet scrubber and Oil skimmer Double scrubber will be demonstrated at booth#1221 |
 
|
|---|---|
| ACO offers dust and oil remover for dry/wet. Wet scrubber is dust/odor remover. Double Scrubber can remove fine powder down to 1 micron. Oil Skimmer can remove oil from water. Oil skimmer MINI with solar panel can be installed without power supply. Please see the actual setup at our booth #1221 Jet Separator, a secondary air-introducing-type patented dry dust remover, is used in pneumatic line. |
|
| MATSUSHIMA Measure Tech #1221 Microwave level meter for continuous level metering in a big silo |
 |
|---|---|
| Matsushima Measure Tech Company Ltd. offers level and flow measuring instruments covering all kinds of principles, such as 26GHz Pulse Radar Microwave Level Sensor, FMCW microwave, ultrasonic, electromechanical, vibrating, capacitance, rotary paddle, and more to cover simple storage silos up to high temp./pressure furnaces, ovens, and kilns in the metal, power plant, mining, plastics, food processing, chemical, and other industries. Various kinds of conveyor automation devices and position indicators are also available. 26GHz Pulse Radar level sensor to measure the powder/bulk/ level from 0.3 meter (1 feet) up to 70 meter (230 feet), which will fit large/tall silos Dust switch/dust monitor is also available. |
|
| APPIE (The Association of Powder Process Industry and Engineering in Japan) #2303 |  |
|---|---|
| APPIE is the only Japanese professional organization in the powder and particle processing industry composed of industrial corporations and academic societies. We contribute to the advancement of the powder industry and technology. APPIE hosts and organizes POWTEX OSAKA 2021 & POWTEX TOKYO 2022, the largest international powder technology exhibition in Asia. | |
Powder handling equipment & technology ◆ for chemicals/pharmaceuticals ◆
|
KAWATA USAInc. (Super Mixer, Super Floater) |
booth #1221 |
|---|---|
AAAmachine, Inc. will answer questions on the following equipment at booth #1221 |
|
|
Matsushima Measure Tech Co., Ltd.(level sensor) at booth #1221 |
|
Powder custom processing service
|
Osaka Gas Liquid (Powder processing service - Cryogenic grinding) |
booth #1221 |
|---|
Energy saving technology - Miniature solar panel, Adsorption heat pump chiller
|
AAA Save Energy LLC. ( Adsorption heat pump chiller, Solar panel) |
booth #1221 |
|---|
Food process equipment & technology ◆ booth #1221 ◆
|
MITSUMI Technical Industry (MITSUMI Iris Valve "CHOKE VALVE") |
booth #1221 |
|---|
Packaging technology ◆ booth #1221 ◆
|
AAAmachine Japan Inc. (NLI Chicago - Full-automatic open bag system for 50 lbs bag) |
|
iPBS (Process Technology for Industry) provides a full range of processing technologies, products,equipment, systems and services conveniently located in dedicated events focused on powder and bulk solids processing, food process, chemical processing, pharmaceutical processing, and packaging solutions for the processing industries.
iPBS - Powder & Bulk Solids 2014 Jointly held with 4 major exhibitions - (1) Food Process, (2) ChemProcess, (3) PharmaProcess, (4) ProcessPack --- total 5 exhibitions |
|
You are welcome to visit our booth for free by pre-registering in the following page. |
|
AAAmachine, Inc. is happy to assist this Powder Show international visitors to make an appointment at any exhibitor's booth no matter if AAAmachine is marketing that exhibitor company or not. International business matching is our corporate goal. We are more than happy to assist all international guests to find the right equipment. At the same time, all exhibitors should be able to meet and find the potential customers. All equipment which is successfully sold in the country must have the reason to be selected. If the features of equipment match the customer's needs, it should be found even from a different country. Each equipment has different features. AAAmachine is technical and marketing agent of these companies in US. |
Powder/Bulk handling & Green technology booth at PBS-iPBS 2021
ACO Booth (#1221)
 |
ASADA MESH Booth (#1221)
 |
Mitsumi Technical Booth (#1221)
 |
Tsutsui Scientific booth (#1221)
 |
NBC Meshtec Booth (#1221)
 |
Nisshin Engineering booth (#1221)
 |
Nisshin Engineering booth (#1221)
 |
KAWATA MFG booth (#1221)
 |
APPIE booth (#2303)  |
Thank you for your visiting our booth and/or your interest in the following technologies. Please use the following questionnaires for further information.
≫≫ international Powder & Bulk Solids - iPBS 2023
▶ Date:April 25(Tue)-27(Thu), 2023
▶ Place: Donald E. Stephens Convention Center, IL
Booth#: 1637
* Largest powder handling equipment/technology exhibition in USA
* Unique technology powdered by AAAmachine will bedisplayed at booth #1637(600sf).
Inquiry
Please feel free to contact us from the following
