*** Powder & Bulk Solids - PTX Canada 2013 is coming soon ***

FUJISAKI ELECTRIC spray dryer

MICRO MIST SPRAY DRYER (1) Using patented 4-fluid nozzle, continuous atomizing operation is possible for hours. (2) Large atomizing capacity of particles in "single micron" size is possible. (3) Keeps exhaust temperatures low. (4) Sharp and narrow particles size distribution can be produced.

AAAmachine is assisting the following global powder handling equipment manufacturers in USA and from outside of USA.

AsadaMesh Metal wire mesh	ASADAMESH is a AAA-rated metal screen mesh manufacturer and supplier in Japan - ASADA metal wire mesh is widely used for screen printing, sieves, filters. By enduring under severe usage conditions, the product achieved 2 ~ 3 micron nominal filtering accuracy. Dutch weave mesh can be woven up to 4,860 mesh per inch (2-3 microns nominal filtering accuracy) and it is ideal for super fine filter material.
YUTAKA Mfg./Nichimo Pulverizer	Counter-current (2 rotors rotating in opposite directions) mechanism achieves fine pulverizing of fibrous materials at low temperature in uniform particle size distribution. Very low operating temperature to protect Vitamin B/C or pulverize oily grain/grain containing sugar. Can replace cryogenic grinding with this counter-current pulverizer.
EXEN Corporation air knocker	Knocker / Impactor 100% operated by pneumatic, to solve any kinds of problems, such as bridging, rat hole, arching, and adhering in the hoppers / bins. This flow-aid device can solve the problem where the vibrators cannot be the solution, especially for fine and sticky powder in toner, ceramics, minerals, food, chemical industries.
KANEKITA air blaster	(1) No solenoid valve is required. Operation control is NOT required either. Speed control valve adjusts the activating timing. Easy!! (2) Explosion proof type available (CE, ATEX compatible) (3) Applicable to any hopper, cyclone, bag house (4) Low noise (5) Stainless steel disc is standard, which lasts long (6) Silicone disc can be used (as an option). No powder is coming into disc during air stops, however, silicone needs to be replaced periodically.
MATSUSHIMA MACHINERY LABORATORY dust switch/monitor, level sensor	Matsushima Machinery Laboratory Company Ltd. offers level and flow measuring instruments covering all kinds of principles, such as 26GHz Pulse Radar Microwave Level Sensor, FMCW microwave, ultrasonic, electromechanical, vibrating, capacitance, rotary paddle, and more to cover simple storage silos up to high temp./pressure furnaces, ovens, and kilns in the metal, power plant, mining, plastics, food processing, chemical, and other industries. Various kinds of conveyor automation devices and position indicators are also available. 26GHz Pulse Radar level sensor to measure the powder/bulk/ level from 0.3 meter (1 feet) up to 70 meter (230 feet), which will fit large/tall silos.
Mitsubishi Plastics Desiccant dryer/Adsorption Heat Pump Chiller - AQSOA Chilled water from hot water	Mitsubishi Plastics  introduced AQSOA(TM) Adsorption Heat Pump Chiller- 10KW (3RT, 36,000 BTU/hr) cooling capacity (267kb), utilizing 65 - 85 degree C (149-185 degree F) hot water, can produce chilled water directly from hot water only. Electricity is used only for control & water flow.  This chiller unit uses waste heat or solar hot water and contributes to environmental sustainability through reduced CO2 emissions. Using water as the refrigerant, this next generation chiller boasts a system COP (Coefficient of Performance) of 10. (COP=10 means 10 kw cooling capacity can be acquired from 1 kw electricity.) No Freon, no Lithium Bromide is required. AQSOA(TM) Desiccant Dryer can produce dry air using low temperature (104-140 degreeF (40-60 degreeC)) regenerating heat source.
KAWATA high speed mixer/blender	An energy-saving mixer, capable of stable and high precision mixing of powders, granules and fluids. The Super Floater is the world's first mixer based on new principles, and has accurately captured the trends of the future. The 3-dimensional motion of the mixing vessel (can), which allows both the fluidization and flotation of material, reduces the density inside the vessel, and the movements of the agitator are added under this reduced agitation resistance. These principles make highly precise batch mixing possible.
TAKAGAKI SEISAKUSHO	This square shut-off valve is usually installed at the end of feeder just before hopper scale. It is a metal touch valve and quickly swings side-to-side. This quickly activates as soon as the signal is sent from hopper scale. No tailing is realized. Takagaki also has a butterfly valve to be used for pneumatic conveying line. (1) Non metal touch/Non gasket, (2) NOT significant leakage, (3) Perfect for hopper bottom for pneumatic conveying
BEACH HEAD	"BI-MODE" --- Global supply chain system at nominal initial cost. Instead of having the own server, standardized software "BI-MODE" is used on line. Multiple language is available as standard - English, Japanese, Spanish and Korean. More language will become available soon. Ticket service (for telephone marketing/service call), parts data base, component module are also available.
IT DeSign	IT DeSign Inc. is providing 2D barcode service with special design in it - "DeSign QR". QR code is now used in USA as well as Data-Matrix, PDF417. "DeSign QR" is visibly original 2D barcode to be used for mobile phone service. It is best marketing tool for food traceability, corporate ID/promotion, store POP and digital signage.
SCORING SYSTEM	The only complete Global Database for worldwide traceback and traceup recordkeeping and documentation of agricultural products with Point-to-Point Traceback™ for each individual Commodity/Entity in just seconds. You can use this software at NO initial/maintenance charge. Data usage fee is $0.55/data.

PTX (Process Technology Expo) provides a full range of processing technologies, products,equipment, systems and services conveniently located in dedicated events focused on powder and bulk solids process, green manufacturing process, design & manufacturing, automation technology, plastic process, and packaging solutions for the processing industries. PTX - Powder & Bulk Solids Canada Jointly held with 5 major exhibitions - (1) PackEx Toronto, (2) Green Manufacturing Expo Canada, (3) Design & Manufacturing Canada, (4) Plast-Ex, (5) ATX (Automation Technology Expo) Canada --- total 6 exhibitions

	Exhibitions INDEX