Products ★Powder Bulk Category List 

1.Handling equipment, Machinery 　　

For inquiry about Nano technology,
please feel free to contact AAAmachine at toll free # 800-996-0070
or use the questionnaire at the bottom of this page.

Nano particle dispersing sprayer DELTA-One

 XEVIOS Corporation    (Japan)

Nano particle dispersing sprayer DELTA-One

 　👉 contact
 　👉 PDF brochure DOWNLOAD Not available

(1) Can disintegrate agglomerated Nano particles (50 - 1000 nano meter diameter) into single ones and spray them on a flat space under a dispersed condition.
(2) Nano particles can be dispersed by friction charging, going through a small metal pipe.
(3) By monitoring the charge level at the pipe in-line, feed back control is possible.
(4) Dispersing/spraying time is shortened by this newly developed continuous system (not batch type).

Electronics, dry dispersing on film, glass, silicon wafers, etc.

RF Plasma technology (Radio Frequency Plasma)

NISSHIN ENGINEERING   (Japan)
 👉 contact
 👉〔catalog〕 RF Plasma technology(343kb)

(1) A larger flame and higher production efficiency than DC
(2) Ability to operate without the presence of any electrode makes nanoparticles obtained as pure as the raw material without suffering contamination from the evaporation of the electrode.
(3) Compound, core-shell, oxidized/non-oxidized and other various composition are possible.

Electroceramics, battery, metallurgy, etc.

Nano Jet Pul (wet jet mill, media-less wet disperser)

JOKOH Co., Ltd.  (Japan)

 　👉 contact
 　👉〔catalog〕 (130kb)  Model: JN-20

(1)Media-less wet grinding/dispersing ---> No media is used, less contamination
(2) 4 objectives by one unit - disintegration, grinding, mixing, emulsification/homogenizing
(3) High pressure up to 250 MPa by built-in plunger pump
(4) High viscosity (up to 20,000cP) sample can be fed
(5) From 4 ml/batch (JN10) to 60 liter /h (JN1000) production model is available.

Carbon nano-tube (CNT), Barium Titanate, Cellulose, Carbon black, Nickel, cosmetics, pharmaceuticals, foods, cluster water, etc.

SC(QC)/MSC mill (media agitating mill)

NIPPON COKE & ENGINEERING  (JAPAN)
 　👉 contact
 　👉〔catalog〕 SC_Mill-Mitsui_Mining_4page
 　👉〔catalog〕 MSC_Mill-Mitsui_Mining_2page
 　👉〔catalog〕Calcium_Carbonate_Grinding_Process

(1)Sub-micron and nano-meter size wet grinding/dispersing using media
(2) Union Process (http://www.unionprocess.com) also sells QC-mill with Attritor
(3) Best matching with Attritor
(4) MSC mill- Media size from 15 microns to 200 microns in diameter. No screen is used - no clogging on screen. (SC mill - Media size 200 microns or coarser. Media separator is used)

calcium Carbonate, talc, minerals, ceramics, paper industries

Screen mesh for sieve / sifter / filter

NBC Meshtec  (USA/Japan)

Screen mesh for sieve/sifter/filter

👉  Detailed web site    👉 contact
👉 〔catalog〕Amidology_070403_NBC-Dynamesh (128kb)
👉 〔catalog〕Nafitec_screen_mesh-NBC (155kb)
👉 〔catalog〕Screen_Mesh_Spec_Table (397kb)

(1) Nylon, Polyester and other material available in wide range of screen mesh size
(2) NAFITEC screen ? coated by nano particles ? is creating new market == more air flow with finer mesh, less agglomerating with same mesh, etc.
(3) Insect net for HACCP/IPM

food, plastics, metal