|
|
|
|
|
|
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mitsubishi Plastics Inc. (MPI) will show novel method of AQSOA dehumidification and cooling system used for Adsorption Heat Pump (AdHP) Chiller at booth #7046 At AHR Expo 2014 (Air-conditioning, Heat & Refrigerating Exposition). Mitsubishi Plastics will exhibit AQSOA(TM) Adsorption Heat Pump (AdHP) to be introduced for energy saving chiller needs. AQSOA 10kw (3RT = 36,000 BTU/hr cooling capacity) AdHP chiller with built-in cooling tower model (Union Industry) is now available. (pdf brochure download  267kb). AQSOA 10kw (3RT = 36,000 BTU/hr cooling capacity) AdHP chiller with built-in
pumps model (Fahrenheit) is also available now. (pdf brochure download 758kb). Chilled water can directly be produced from hot water only (electricity
is used only for control & water flow)..
AQSOA(TM) compact adsorption chiller (manufactured by Union Industry and Fahrenheit) Please visit the "ICE-QUICK" video web site for cooling principles of AdHP chiller. ●AQSOA adsorption heat pump (AdHP) mechanism
MPI offers AQSOA dehumidification and cooling system utilizing low temperature heat 65-85 degree C (149-185 degree F), which can be acquired by solar heat, cogeneration unit and other heat source/waste. This will achieve huge energy saving (up to 63% electricity saving plus heat recovery). Desiccant dryer system is also available using AQSOA - patented Zeolitic material. Please visit our booth #7046 to see this innovative AQSOA technology and our material variety for producing plastics. Mitsubishi Plastics Inc. AQSOA page Fahrenheit AdHP chiller using AQSOA(TM) heat exchanger system will be displayed for chiller needs using low temperature (149-185degree F (65-85 degree C)) hot water to produce 50 degree F (10 degree C) chilled water.
AQSOA adsorption heat pump (AdHP) chiller can produce chilled water at 5 - 15 degreeC (41 - 59 degree F) using waste water at 65 - 85 degree C (149-185 degree F). This unit is ideal for renewable energy, waste energy and biomass energy applications and contributes to environmental sustainability through reduced CO2 emissions. Using water as the refrigerant, this next generation chiller boasts a system COP (Coefficient of Performance) of 10 with extremely low absorbed power. (COP=10 means 10 kw cooling capacity can be acquired from 1 kw electricity.) <AHR2014 Mitsubishi Plastics/Fahrenheit Booth>
AQSOA Desiccant system and installation example
Please contact by questionnaire form or call AAA Save Energy at 800-996-0070 for details of all the displayed equipment and the above presentation. AAAmachine and AAA Save Energy are introducing the following global powder handling/save energy equipment. MITSUBISHI Plastics Inc. (AQSOA Desiccant system, Adsorption heat pump = energy-saving technology) <<< MITSUBISHI PLASTICS "AQSOA (TM)" press release >>> Mitsubishi Plastics has developed "AQSOA (TM)" desiccant air conditioning system using patented zeolitic base material on the honeycomb rotor. This system reduces energy cost by 20% comparing with the conventional method - using Silicagel desiccant rotor, which needs high temperature regenerating air. Instead of using high temperature regenerating air (around 150 degree C = 302 degree F), 40-60 degree C (=104-140 degree F) hot air is enough for "AQSOA (TM)". By decreasing regenerating air temperature, low heat exhaust can now be considered as one of the new energy resources, such as exhaust heat from fuel battery, exhaust heat from heat pump, solar heat, exhaust heat from various production plants, etc. "AQSOA (TM) " desiccant system has 7 models (1300 to 9300 m3/h, 765-5472 cfm). This will be widely used at Lithium Ion Battery plant, semi-conductor plant, food processing/pharmaceutical plant, frozen food plant/freezer which needs defrosting and/or humidity control. "AQSOA(TM)" has a power to change the world of HVAC. ACO Co., Ltd. (Dust remover Jet Separator CFS-100/150 & Wet Scrubber) Exen Corporation/Moritani America Inc. (Air knocker/impactor-Flow aid device) NBC/Dynamesh (Screen mesh, NAFITEC technology, screen printing) Takagaki Seisakusho Co., Ltd. (Pneumatic conveyor powder valve) MATSUBO Corporation (air classifier Elbow Jet EJ-L3) Nisshin Engineering Inc. (air classifier Turbo-Classifier TC-15NS) Matsushima Machinery Laboratory Co., Ltd. (level sensor) Matcon (IBC bulk container) And more AAAmachine is a technical and marketing agent of these companies in US. If you have any questions or equipment inquiry, please call AAA Save Energy at 800-996-0070 or e-mail us.
|
 <= Exhibitor list | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
- Mitsubishi Plastics at AHR Expo 2014 in New York, NY
