AAAmachine, Inc. HOME
powder technology alliance
Products
Classification & sieving
Comminution
Other
Services
Exhibitions
DOWNLOAD
FAQ
business prospect
Business mission
Powder technology business outlook
company identity
Corporate profile, location
Message from president
Career opportunities & Customer data protection policy
Links to other site

What's new archive

  • 2011/11/11
    FOOMA 2012 (Food machinery show, Tokyo Big Sight, JAPAN) is scheduled on June 5-8, 2012. AAAmachine will assist globally marketing food machine manufacturers. Please contact us for booth reservation. Dead line is Dec. 15, 2011.
  • 2011/10/24
    Powtex Osaka 2011 ( Intex Osaka, Osaka, Japan) is over on Oct. 21, 2010. AAAmachine introduced Prater-Sterling (hammer mill), Laidig Systems (silo reclaimer), Lowe Industries (sanitary ribbon mixer) and other US equipment along with "Powder & Bulk Solids" trade show 2012 and US magazine at booth#2-08.
    See details
  • 2011/9/5
    YouGrop (Osaka, JAPAN) Blower Sifter - is now introduced to global market. This can sieve powder down to 10 microns (mesh open). Air is passing through screen with powder to keep from clogging. Pass-through air is generated by the rotor in the back of screen (fine side) and the compressed air is used for cleaning screen. Read this page for details
  • 2011/8/5
    New Equipment is now available in USA from MATSUSHIMA Machinery Lab. (Fukuoka, JAPAN). Speed switch - RevMonitor can automatically record the current revolution speed by simply pressing one button. If the speed drops 5-10% from the recorded speed, "RevMonitor" will output an alarm signal. This works at any rotating part. Read this page for details.
  • 2011/7/29
    New Equipment is now available in USA - NPK Nippon Pneumatic MFG. (Mie, JAPAN). Air classifier - MICROSPIN is a static semi-free vortex air classifier for 0.5-10 micron cut point range. Cut point adjustment is simply made by air flow rate change and guide vane. No rotor inside. Read this page for details
  • 2011/7/5
    KANEKITA (Osaka, JAPAN) Air blaster/Air knocker-
    Pul-Blas/Pul-Knocker     - are now introduced to global market. These flow aid devices will solve your current powder/bulk flow problems. Please contact AAAmachine if you are not happy with the existing flow aid devices on your hopper/spout. Read this page for details
  • 2011/6/10
    KAWATA MFG. (Osaka, JAPAN) Plastic Bag Holding Mixer - SUPER FLOATER is now introduced to global market. This 3-D movement mixer achieves various kinds of blending without washing at all. Just change the plastic bag inside the mixer. Read this page for details
  • 2011/6/6
    Nisshin Engineering (Saitama, JAPAN) Semi-Free Vortex Type air classifier - Aero Fine Classifier is now introduced to global market. This new air classifier features a precise submicron classification with no rotor used. 0.3 microns cut point can be achieved for Nickel powder (top size 1 micron). Read this page for details
  • 2011/5/1
    SHIN NIPPON AIR TECHNOLOGIES (Tokyo, Japan) Fine Particle Visualization System is now introduced to global market. This features
    (1) visualize dust/powder (down to 0.1 micron) using camera & image processing technology (laser)
    (2) be used for workers' training (ex. how to walk in the clean room without generating dust, find out the most dust-generating part from your moving, find out where is the best location for dust collecting hood, etc.). For machinery (for design) maker, Clean room especially for pharmaceuticals, electronics, etc. - in case of dust/powder to be monitored . Read this page for details
  • 2011/4/26
    KAWATA MFG. (Osaka, JAPAN) High Speed Fluidized Mixer - SUPER MIXER is now introduced to global market. This Henschel type mixer features a various type of blades (upper/lower and blades for cooling) and GMP - pharmaceutical model is available. From desk top (1.8 liter) to big production (1000 liter - full capacity) model for plastics, metals, ceramics, glass, toners, pigments, cosmetics/pharmaceuticals, minerals, wood flour, etc. Read this page for details
  • 2011/4/1
    Chuo-Kakoki-Shoji (Chiyodaku, Tokyo JAPAN) Tandem Ring Mill (jointly developed with Akita Pref. Univ.) achieves 30 micron pulverizing of 1 metric ton's wood chips in just an hour for Bio Ethanol. Please contact AAAmachine for details.
  • 2011/3/30
    Upcoming trade show information is included in this top page. Please see the bottom of this page.
    There will be Powtex Osaka show on Oct. 19-21, 2011 in Japan. If you are interested in exhibiting and/or attending, please contact AAAmachine.
  • 2011/3/08
    MATSUSHIMA MACHINERY LAB. launches new equipment
    <1-1> Wire-rope type emergency stop switch PULLSTOP
    In addition to Matsushima ELAW series Pull Cord Switch, new PULLSTOP with wire-breakage detection mechanism and in compliance with international safety regulation is launched! 1) In compliance with international standard EN418, ISO13850, JISB9703, etc. 2) Wire-breakage detection mechanism integrated. 3) Robust and reliable construction. Download brochure.
    <1-2> Compact & reasonable broken bag detector DUST SWITCH
    Aside from DUST MONITOR for large size industrial dust collector emission monitoring system, compact & reasonable broken bag detector DUST SWITCH is introduced by Matsushima. 1) Easy mounting with light weight and compact triboelectric probe system. 2) No difficult adjustment required. 3) NPN output possible to connect directly to PLC. Download brichure.
  • 2011/2/7
    AHR Expo 2011 (Air-conditioning, Heat & Refrigerating Exposition) is over on February 2 (Wed), 2011 in Las Vegas, NV. Mitsubishi Plastics exhibited AQSOA(TM) Adsorption Heat Pump to be introduced for energy saving chiller needs. AQSOA(TM) Desiccant Drier demo system was displayed for dry air needs using low temperature (104-140 degreeF (40-60 degreeC)) regenerating heat source.
    See details
  • 2010/12/20
    Counter Current Pulverizer YTK series (by YUTAKA MFG) is now available in Chicago for powder processing service. Please try YUTAKA's low temperature (down to 6 dgree C temp. increase) fine pulverizer for rice, soy bean, barley, green tea, carrots, herbs, spices, etc. See details
  • 2010/11/12
    Powtex Tokyo 2010 ( Tokyo Big Sight, Japan) is starting from Dec. 1, 2010. AAAmachine will introduce Prater-Sterling, Laidig Systems and other US equipment along with "Powder & Bulk Solids" trade show 2012 and US magazine at booth#: E-11, E-12, E-13.
    Please register now for free entry. See details
  • 2010/10/11
    Battery Technology Expo 2010 is over on October 7, 2010 in San Jose, CA. Mitsubishi Plastics exhibited AQSOA(TM) desiccant drier system to be used for super dry environment, indispensable at Lithium Ion Battery manufacturing plant.
    See details
  • 2010/10/4
    New equipment is now introduced from Japan. HIGAMS - High Gauss Magnetic Oil Separator by Nippon Magnetic Dressing (Japan). This is used for removing iron particles from coolant oil in steel manufacturitng process.
    <AAA features>
    Oil usage can be dramatically decreased compared with conventional magnetic separator (1/6-1/20) or electro-magnetic filter (about 1/3).
    See details
  • 2010/8/27
    New service is now available at AAAmachine laboratory in Des Plaines, IL. CILAS - laser type particle size distribution analysis machine 930L is available for particle size analysis and powder classification service in Chicago.
    See details
  • 2010/8/2
    New equipment is now available in USA. MATSUSHIMA - MICROWAVE BARRIER SWITCH upgraded. This is a non-contact principle point level detection switch effective for high-temperature, high pressure or corrosive application.
    Upgraded with following additionalfunctions:
    * Detecting range extends to 100m (329 feet)
    * Receiving energy indication for easy setting
    * Channel selection (4ch) to avoid interference for multiple installation.
    See details
  • 2010/6/1
    New equipment is now available in USA. YUTAKA - Low temperature fine pulverizer for rice, soy bean, barley, green tea, carrots, herbs, spices - Counter-current PulverizerYTK series was introduced at PTXi.
    See details
  • 2010/5/14
    New equipment is now available at AAAmachine laboratory in USA. FUJISAKI - NANO technology Spray Dryer service is now available in Chicago.
    See details
  • 2010/5/10
    International Powder & Bulk Solids-PTXi 2010was held on May 4-6, 2010 at Rosemont, IL. AAAmachine introduced the following powder technology solutions.
    (1) Agglomeration problem when drying micron order slurry? (2) Eliminate ultrafine powder not-collected at bag house or odor/vapor generated from your system? (3) Look for more yield in sub-micron to 5 micron particle size? (4) Look for different technology to solve powder flow problem?
    AAAmachine has an answer.
    See details
  • 2010/5/1
    New equipment is now available. JOKOH - Wet jet mill (medialess disperser).
    See details
  • 2010/3/1
    New equipment is now available. TAKAGAKI - Feeder end shut-off valve.
    See details
  • 2010/3/1
    New service is now available. IT DeSign - "Design QR" - 2D barcode for mobile phone solution. To be used for food traceability on packaging label, digital signage, digital coupon
    See details
  • 2010/3/1
    Food technology trade show in US and in Japan
    FOOMA 2010     (Big Sight, Tokyo, Japan) is coming in June and FPSA’s PROCESS EXPO & IFT FOOD EXPO 2010 (McCormic, Chicago, IL) is coming in July.
  • 2010/2/1
    New equipment is now available. Akatake Engineering - KaruGaru Feeder (Vibrating type damper feeder). See details
  • 2010/2/1
    International Powder & Bulk Solids-PTXi2010 is coming in May 2010. E-coupon is available for free registration.
    See details
  • 2010/1/4
    Global trade show calendar is now available for 2010. See details
  • 2010/1/1
    Global supply chain BI-MODE "Component Module"is released by Beach Head. See details
  • 2009/12/24
    New equipment is now available. Sankyo Pio-Tech - Stopless Flow Meter.
    See details
  • 2009/12/14
    India Chem Gujarat 2009 (Gujarat, INDIA) is over. AAAmachine introduced US/Illinois manufacturers.
    See details.
  • 2009/12/1
    New movie is now available. ACO - Jet Separator (dust remover), Exen - air knocker/vibrator comparison. See ACO video, Exen video
  • 2009/12/1
    InChem Tokyo 2009 ( Big Sight, Tokyo, Japan) is over on Nov. 20. ACO, Matsubo exhbited. See details
  • 2009/11/1
    Powder Technology Before & After
    * Pleats cartridge filter in food grade
    * Low price & compact timer control box for air knocker
    See details
  • 2009/10/24
    Powtex Osaka 2009 ( Intex Osaka, Japan) is over. AAAmachine introduced US equipment, "Powder & Bulk Solids" trade show and US magazine.
    See details.
  • 2009/10/8
    Dynamesh, Inc.
    will introduce the latest screen mesh technology at Solar Power 2009 in Anaheim, CA from Oct. 27.
    See details.
  • 2009/10/1
    Powder Technology Before & After
    * Air knocker has achieved energy saving
    * Wet scrubber has improved maintenance for salt line
    See details.
  • 2009/10/1
    BI-MODE
    B to B - Supply chain system & E-commerce system is now available from AAAmachine/Beach Head. See details.
  • 2009/9/1
    Toll processing/rental is available in Chicago.
    See details.
  • 2009/9/1
    Powder Technology Before & After
    * Belt conveyor swaying trouble
    *     Level sensing problem for high temperature liquid
    See details.
  • 2009/8/1
    Powder Technology Before & After
    * Recycling Electric Appliance (difficulty in removing fine powder/foam)
    * 20% energy save Desiccant HVAC (than silicagel) - 40 to 80 degreeC low temp. hot air exhaust can be utilized
    See details.
  • 2009/6/26
    AAAmachine laboratory "OPEN HOUSE" is over. See all the photos. details.
  • 2009/6/1
    Powder Technology Before & After
    * Recycling PVC floor tile (difficulty in removing fiber)
    * Solar power HVAC solution - low temperature hot air exhaust can reduce CO2 by 64%
    See details.
  • 2009/5/22
    International BUY-Direct E-commerce Service i-BES site is now open. See details.
  • 2009/5/1
    New site "AAA Save Energy" site is now open.

    New equipment is introduced. Please visit our Other/products page.
    * ACO - Wet Scrubber
    * Mitsubishi Plastics - Desiccant/HVAC
    * Fluid Energy - Jet-O-Mizer
    *Takara System, Nara Machinery, Ikegai, Xevios, and more.
  • 2009/3/1
    BUY-Direct is almost ready. You will soon be able to buy foreign equipment or consumable parts at our site.i-BES (International Buy-direct E-commerce Service)
    NBC Screen Mesh to be added.
  • 2009/2/1
    BUY-Direct will lead you to buy foreign equipment or consumable parts at a local price from manufacturers. -- On-line e-commerce
    Takagaki VALVE to be added
  • 2009/1/1
    New marketing plan released
    LIGHT plan and A-la-carte Plan -     No monthly charge with     LIGHT Plan. You can choose service whatever you like with A-la-carte plan.
  • 2008/10/31
    ACO - Jet Separator solves "white spot" problems of plastic injection molding process. -- Before & After No.11
  • 2008/9/30
    Mitsui Mining - KNEADEX newly introduced. Increases wax percentage up to 10% in color tonerto replace extruder. -- Before & After No.10
  • 2008/8/1
    New corner is added.- All About Powder Technology, Powder Technology Before & After.
  • 2008/6/23
    New literature added. - "Preparation and Property Control of Fine Powder in Dry Process" presented at NANO POWDER SESSION of Technical Conference at Powder & Bulk Solids 2008 on May 8 in Chicago by Dr. Akiyama (Nisshin Seifun Group Inc.).
  • 2008/5/12
    Trade show information renewed. - Powder & Bulk Solids on May 6-8 in Chicago!
  • 2007/12/20
    AAAmachine Inc. web site renewed.
  • 2007/10/19
    Joined Powtex Osaka 2007 (Oct. 16-19) in Japan and introduced Powder & Bulk Solids 2008 in Chicago.
  • 2007/4/26
    Joined Powder & Bulk Solids Southeast 2007 (April 24-26) in Atlanta., GA. Introduced MATSUBO, Mitsui Mining, NBC/Dynamesh and Nisshin Engineering.